2110 Scopes Specs
Video Input (Hardware dependent)
SDI
- Single Link SDI/HD-SDI 4:2:2 8/10 bit
- Dual Link HD-SDI 4:4:4 10/12 bit
- Dual Link HD-SDI 4:4:4:4 10 bit
- Quad Link HD-SDI (Quad HD and 4K) 4:2:2 or 4:4:4 8/10/12 bit
- 3G/6G Dual Link (see dual link above)
- 3G/6G Dual Rate (see single link above)
- 12G QHD/4K Quad Link and 2SI 12G (sample interleave)
- 12G x 4 SUHD/8K 2SI
- CCIR-601 (SD), Rec.709 (HD), BT.2020 (WCG), P3 or Rec.709 (QHD/4K)
- HDR (High Dynamic Range) as ST2084/PQ/HDR10 or HLG
HDMI
- HDMI (1.4 or 2.0+, hardware dependent)
SMPTE
- SMPTE 2110/2022-6
NDI
- NDI <network local> - (Network Device Interface) Any NDI audio/video source
Adobe/Avid
- AJA shared mode (requires AJA board)
- ScopeDirect - receive audio/video from application running on the same machine
- ScopeDirect Transmitter (Adobe)
- ScopeDirect OpenIO (Avid)
- Adobe/Avid NDI
Desktop
- View your desktop through scopes
Sync
- Reference video sync (Blackburst or Tri-Level, hardware dependent)
Audio Inputs (Hardware Dependent)
- NewTek NDI®
- Embedded audio, up to 16 channels 24 bit
- Analog inputs, up to 16 channels 16/24 bit
- AES/EBU audio, up to 16 channels 24 bit
Outputs
- Main output (computer monitor) from HD up to 8K
- Secondary down converted output available
- SD/HD/2K down conversion to HDMI and analog
- HDMI 4K/8K quadrant output
- Available in monitor HDR -> SDR picture conversion
Format Support (hardware dependent)
- SD - PAL/NTSC
- 720P - 23 / 24 / 25 / 29 / 30 / 50 / 59 / 60
- 1080i - 23 / 24 / 25 / 29 / 30
- 1080PsF - 23 / 24 / 25 / 29 / 30
- 1080P - 23 / 24 / 25 / 29 / 30 / 50 / 59 / 60
- 2K Digital Cinema (2048 x 1080) - 23 / 24 / 25
- 2K Film (2048 x 1556) - 14 / 15 / 23 / 24
- UltraHD/UHD (3840 x 2160) - 23 / 24 / 29 / 30 / 50 / 59 / 60
- 4K (4096 x 2160) - 23 / 24 / 29 / 30 / 50 / 59 / 60
- SUHD (7680 x 4320) - 23 / 24 / 29 / 30 / 50 / 60
- 8K (8192 x 4320) - 23 / 24 / 29 / 30 / 50 / 60
Processing Modes
8K/SUHD/4K/QHD/HD/SD Processing Modes:
- YCbCr 8 bit 4:2:2
- YCbCr 10 bit 4:2:2 (standard single link)
4K/QHD/HD/SD Processing Modes
- YCbCr 8 bit 4:2:2
- YCbCr 10 bit 4:2:2 (standard single link)
- YCbCr 12 bit 4:4:4 (dual link or 3G)
- RGB 8 and 10 bit 4:4:4:4
- RGB 10 and 12 bit 4:4:4 (standard dual link or 3G)
Metadata (hardware dependent)
- LTC/SMPTE analog time code and user bits
- VITC/D-VITC vertical blank time code and user bits
- RP-188 HANC time code and user bits
- RP-215 VANC time code, user bits, key code and ink code
- Active Format Description detection
- DID/SDID detection and highlighting
Recommended Hardware (hardware dependent)
For SMPTE 2110/2022
- Matrox: ST 2110 Network Adapters
- AJA: Kona IP
- Mellanox NVIDIA Bluefield-2 or Connect-X 6: (requires Rivermax license)
For 8K/SUHD
- AJA: KONA 5G
For 4K/QHS/HD/SD